Stainless steel IBC bucket manufacturer explains the transportation precautions for stainless steel buckets and the cleaning of chemical buckets

2026-08-27 10:25:05

Stainless steel IBC bucket manufacturer: What should be noted during the transportation of Stainless steel buckets?

The outer frame of the stainless steel bucket is made of hot-dip galvanized metal, and the inner liner is made of 304 stainless steel. The bucket body adopts a large circular arc angle, and there should be no sanitary dead corners inside. The welds should be treated and ground flat to protect the stored objects from external impact, pressure, temperature, direct exposure, etc. This product is durable and can be reused.

Stainless steel IBC bucket manufacturer: What should be noted during the transportation of stainless steel buckets?

Before filling, the operator needs to test the chemical compatibility of the liquid to be filled in the internal container.

If hot filling is required, it must meet the standards, the liquid temperature cannot exceed 70C, and the lid can only be tightened after the liquid inside has cooled to a temperature similar to the environment.

3. The loading and unloading of stainless steel drums requires lifting from the bottom, and top lifting is not allowed.

When loading two layers, standard buffer pads need to be placed in the transport container or carriage and securely tied.

During transportation, it is important to avoid sudden and violent collisions and impacts on the inner container and valves caused by external forces.

When transporting in hot weather, remember to store it under the ceiling and keep it away from relevant heat sources to prevent exposure of the bucket and the liquid inside the bucket.

8. Tonne barrels are used for many volatile liquids, and during transportation, breathable coverings that meet standards should be selected.

Stainless steel IBC bucket manufacturer: How to clean chemical buckets?

The chemical drum is made of high-density polymer resin as raw material, blow molded in one go, and the outer sheath is a grid made of square galvanized steel pipes welded together. The chassis adopts a four fork European standard all steel tray, which is placed steadily. The bottom is equipped with a discharge valve to facilitate the discharge of liquid from the container. The top inlet valve of the device is suitable for filling products that produce gas during storage or transportation.

How to clean the chemical bucket?

1. Cleaning skills

When cleaning a chemical bucket, the main purpose is to remove residue and odors. A common cleaning method involves preparing millet, dishwashing detergent, and warm water, mixing them together, pouring them into a ton bucket, shaking them vigorously, and then rinsing them clean. Even if these materials are not available, salt and laundry detergent can be used instead, and the cleaning effect is also significant.

2. Cleaning methods

Cleaning different things, such as sludge and scale, requires different methods. If it is oily, use benzene based solvents such as toluene and xylene to clean, and use alcohol and ethanol to clean water-based resins; If it is epoxy resin, xylene or benzene, 200 # solvent oil, and n-butanol also have a significant effect; Before curing, the epoxy resin and curing agent can be cleaned with ordinary organic solvents such as alcohol, acetone, toluene, banana oil, gasoline, etc. The adhesive layer can be softened by soaking it in acetone, wiped with anhydrous alcohol or acetone, or removed by direct high-temperature heating. The remaining adhesive layer can be soaked and wiped with acetone.

3. Cleaning precautions

After cleaning the chemical drum, it needs to be dried. If it is a ton drum containing acidic solution, it should be neutralized with the corresponding solvent before cleaning. The wastewater from washing the ton drum must be treated before discharge, otherwise it will pollute the environment.

That's all for today's explanation. If you need to purchase stainless steel ton barrels or stainless steel IBC ton barrels, you can consult our company.